Αποφυγή του (συχνού) καλιμπραρίσματος - DistoX

Εαν τοποθετήσουμε τις μπαταρίες κάπως μακρύτερα από το DistoX μπορούμε να γλυτώσουμε το "βαρετό" & συχνό καλιμπράρισμα της συσκευής:nnhttp://4.bp.blogspot.com/_0b-MGxpLuvE/S ... CF0009.JPGnnHi,nn nnIn the club were I’m member from we have 2 distox – A3’s. In the beginning we had the same problem. But bringing the batteries outside the disto via a wire solved the problem.nn nnSee photo via the linknnhttp://4.bp.blogspot.com/_0b-MGxpLuvE/S ... CF0009.JPGnn nnDagobert (Sc-Avalon)nn nn nnnMazda Motor Logistics Europe NV, Blaasveldstraat 162, B-2830 WillebroeknVAT BE 0406.024.281, RPR Mechelen, ING 310-0092504-52, IBAN : BE64 3100 0925 0452, SWIFT : BBRUBEBBnnFrom: auriga-topo@yahoogroups.com On Behalf Of piezo24slukanSent: zaterdag 25 februari 2012 10:06nTo: auriga-topo@yahoogroups.comnSubject: [auriga-topo] Tip for DistoX cellsnn nn nnThere are many problems with recalibration after each cell change. There is idea to use "non magnetically" cells as ZnCl primary cells are. These cell have no enough current capacity for laser measurement so only about 100 shots one may do. I tested the DistoX calibration with three sets of ZnCl batteries:nnStandard test: four measurements with 90° rotation, one backside, no recalibration between measurements with different sets of batteries.nn1. set:nn9,7n9,7n9,8n9,7n189,3nn2. set:nn9,4n9,8n9,7n8,9n189,3nn3. set:nn9,7n9,7n9,3n9,0n189,1nnIt was quite cold, so my hands were not rock stabile nnJust practical experience:nnDon't make shots too fast. Short delay will increase the utilizable capacity of ZnCl batteries.nFirst sign that batteries are empty is that DistoX will off itself after measurement. One may do several measurements more with longer delay, but not many. DistoX memory will be still OK.